DCX Cooling Pack
The DCX Cooling Pack includes as a whole
- A box (for the immersion of Asics or Rigs)
- An electrical panel (for Asic or Rigs)
- A radiator (to cool the liquid)
- All the pipes (for the connection of the different sets)
Visa / Mastercard / Maestro / Blockonomics
DHL / FEDEX
Compatible with all crypto mining hardware
The mining immersion case is capable of supporting crypto mining hardware, including GPU rigs and ASIC miners. Each universal immersion mining case will accommodate 8 to 16 GPU rigs with up to 12 GPUs each, or 15 new Whatsminer M20/30/31 series ASIC miners, or 8 x S17 or S19 Antminers. This translates to 96 GPUs or 15-18 ASIC miners in an immersion mining enclosure. Stacking cases at 2/3 levels will effect 288 GPUs or 45 miners in less than 1 square meter. It's the best you can get!
Performance increase. Reduced bills
The numbers are impressive, 30% lower electricity bills with a PUE of 1.05, most fans can be removed, and the system cools miners for a long time with PSUs. Liquid cooling systems allow overclocking and fine-tuning with custom firmware that produces 20% more hash with hardware and software optimization. Plus, most users get up to 10% more share through stability
Quiet and discreet mining
An ASIC miner generates 75 dB noise day and night. With a small farm of 2-4 rigs or ASIC miners, this is unbearable 24/7. A specific location is required. Juveniles should be spaced out and placed in a relatively cool place. The air must be filtered and ventilated, which means expenses for fans, air conditioning, location, filters. With our liquid immersion cooling, you can operate quietly wherever you want or in the area with the most suitable power. Placing 72 GPUs or 18 ASIC miners in the box with dimensions less than 70x60x60 solves all problems. As simple as that.
Sustainable heat reuse
Durability is key. The proprietary engineering fluid extracts 100% of the heat from the ICT or Blockchain infrastructure. Hot liquid 60°C / 140°F can be # reused for local community or office heating. This mobile system can be located near solar or hydroelectric or biomass power plants to utilize excess energy or waste/biomass and power infrastructure with a PUE close to 1.01 and a virtually zero carbon footprint.
Our systems are designed and built to operate in remote locations close to energy sources such as solar power plants, wind turbines or hydroelectric plants. Immersion cooling completely isolates the equipment from the outside air. The system works flawlessly even in a hot climate, with high ambient temperatures being a real alternative for remote mining. We have eliminated all mechanical parts requiring frequent replacement. Only active subsystems: pumps, have an industrial grade MTBF.
Access to cheap or surplus energy
From the universal immersion mining case to the immersion mining rack to the mobile mining container – you can operate in remote locations and use low-cost energy directly at the source. This allows us to position or migrate your mining farm to regions with a competitive supply or overcapacity of energy – negotiate smartly with green energy providers around the world: solar, wind or hydro power plants.
State-of-the-art liquid immersion cooling
We have designed, developed and tested a radically new self-regulating liquid cooling system specifically designed for the blockchain mining industry. This patent-pending cooling solution achieves class-leading energy efficiency with consumption of only ~1% of total system energy consumption.
Fewer repairs, more uptime!
The technical fluid is compatible with 95% of the mining systems for which we have been able to verify the compatibility of the materials. This system will ensure improved MTBF throughout the life cycle of the mining infrastructure. Systems immersed in liquid are completely protected from high temperatures, humidity, dust and vibrations. All of this results in an immediate increase in miner MTBF and the elimination of a majority of scheduled maintenance.
Plug and Mine
Ready to use, delivered with everything needed, the “plug and mine” solution is suitable for everyone who goes pro with 2-3-4 miners or mining rigs. The immersion mining case is also the component of scalable solutions with 10-20-40 cases in our custom racks. Everything is included, whether it's a single immersion case or a complete rack system. It will work perfectly even in a hot climate with a high ambient temperature.
Unprecedented density and mobility!
The MMU / MCU can be equipped with a maximum of 72 universal mining boxes per immersion. Each universal case can accommodate 6 GPU rigs with up to 12 GPUs each, or 25 S9 miners or 8 X S17/S19 standard. This provides the highest density in the industry without losing ICO compliance – you can still transport your container wherever you need it.
In the Pack there are:
- DCX Immersion Mining Chamber
Immersion mining enclosure with hydraulic fittings, 88 l/min continuous duty pump (270 W |
40 dB) and 110 kW brazed plate heat exchanger for double loop systems or to
connect to the house/facility heating or cooling loop. Efficiency: 40kW
heat transfer with 40°C inlet and 60-65°C outlet
- Monitored rack power distribution PDU 220V 1 phase (electrical panel)
Remotely Monitored IPDU Immersion Chamber with 38.4 kW Electrical Load | Voltage
single phase 220-240V, 160 Amps. Equipped with 12 C13 ports with 2 x overcurrent protection
80 amps. The PDU has a local LCD display for quick overview and remote monitoring via
an Ethernet connection.
- ICP40 PRO - 40 kW integrated cooling and pumping system
ICP40 PRO with three-phase system of 50/60Hz industrial fans. System of
integrated cooling and pumping with continuous duty electronic pump of 160 l/min maximum and
dry liquid-air cooler. 1.4x0.7x0.4m dimensions that provide over 43kW of heat transfer
in an ambient temperature of 35°C. Without the fan controller. Two fans 55-67 dB, 50
cm in diameter. Maximum power 600W.
- ThermaSafe R™ liquid is not supplied in this pack (to be taken from the immersion cooling accessories)